Reboot Exclusive Brand MIG Welder MultiprocessMIG160 4 in 1 Flux Core Welding...

Description

FREE SHIPPING IN THE US !!!
Reboot [Exclusive Brand] MIG Welder Multiprocess,MIG160 4 in 1 Flux Core Welding 160Amp 220V,Digital Gas/Gasless Inverter MIG/Stick/Lift TIG Welding Machine Supports 2LB/10LB Wire
【Reboot is an Exclusive Brand】👍[Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs/10lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel.Duty Cycle:40% at 160A and 100% at 120A
👍[Lift Tig Welding] not high frequency tig mode,just switch to “lift tig”on the panel and buy the WP17V tig torch from our store.Please refer the NO. 2 picture to connect the torch
👍[Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well
👍[Generator Supported] this MIG160 welder works well with a generator,but we suggest a 5000W above generator and 30A breaker needed
👍[Warranty] buy this welder with confidence as Reboot offers 3-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!
Parameter: MIG/MMA/LIFT TIG/ARC 4 in 1 WELDING MACHINE Input power voltage: AC 220±15% Rated input power capacity: KVA 4.8 Input current : 19A for mig,23A for MMA Rated output current :160 Duty-cycle :85 %  Output current range :30-160 A Output voltage range :15-22V Insulation class:　 F Protection class:　 IP21S Dimensions :535×305×345MM Weight :12KG Efficient: 85%  Wire feeder: Inside  Power factor cosφ 0.93  Welding thickness: ≥0.8 mm  Diameter of wire: 0.8/1.0mm  Troubleshooting: Why is my mig160 Welder not welding correctly? 1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly? 2. Wire choice: Are you using .035” wire? We recommend .030-0.35" for best performance. 3. Stick out: Is your stick out too long? Your stick out should be no more than ½”. 4. Pull the trigger: To begin welding, pull the trigger on the MIG gun. 5. Proper grounding: The ground should not be attached to painted or coated metal.
Limited time SALE !!! Don’t miss out, buy yours now!
Shipping
We offer FREE shipping on all orders in the US !!!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order or question regarding your transaction, please contact us  before leaving any type of feedback and we will do our best to make you satisfied.
We will work with you to resolve any problem you may have.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Reboot [Exclusive Brand] MIG Welder Multiprocess,MIG160 4 in 1 Flux Core Welding 160Amp 220V,Digital Gas/Gasless Inverter MIG/Stick/Lift TIG Welding Machine Supports 2LB/10LB Wire